1
SPECIAL MATERIALS AND RELATED EQUIPMENT
-
# 1A.
Systems, Equipment and Components
-
# 1A001.
Components made from fluorinated compounds, as follows:
-
# 1A002.
"Composite" structures or laminates, as follows:
-
# 1A003.
Manufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
-
# 1A004.
Protective and detection equipment and components, not specially designed for military use, as follows:
-
# a.
Full face masks, filter canisters and decontamination equipment therefor, designed or modified for defence against any of the following, and specially designed components therefor:
-
# b.
Protective suits, gloves and shoes, specially designed or modified for defence against any of the following:
-
# c.
Detection systems, specially designed or modified for detection or identification of any of the following, and specially designed components therefor:
-
# d.
Electronic equipment designed for automatically detecting or identifying the presence of "explosives" residues and utilising 'trace detection' techniques (e.g., surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).
-
-
# 1A005.
Body armour and components therefor, as follows:
-
# a.
Soft body armour not manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor;
-
# b.
Hard body armour plates providing ballistic protection equal to or less than level IIIA (NIJ 0101.06, July 2008) or "equivalent standards".
-
-
# 1A006.
Equipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
-
# 1A007.
Equipment and devices, specially designed to initiate charges and devices containing "energetic materials", by electrical means, as follows:
-
# 1A008.
Charges, devices and components, as follows:
-
# a.
'Shaped charges' having all of the following:
-
# b.
Linear shaped cutting charges having all of the following, and specially designed components therefor:
-
# c.
Detonating cord with explosive core load greater than 64 g/m;
-
# d.
Cutters, other than those specified in 1A008.b., and severing tools, having a Net Explosive Quantity (NEQ) greater than 3.5 kg.
-
-
# 1A102.
Resaturated pyrolized carbon-carbon components designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
-
# 1A202.
Composite structures, other than those specified in 1A002, in the form of thin-walled tubes and having all of the following characteristics:
-
# 1A225.
Wet-proofed platinised catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from water or for the production or upgrading of heavy water.
-
# 1A226.
Specialized packings which may be used in separating heavy water from ordinary water, having both of the following characteristics:
-
# 1A227.
High-density (lead glass or other) radiation shielding windows, having all of the following characteristics, and specially designed frames therefor:
-
-
# 1B.
Test, Inspection and Production Equipment
-
# 1B001.
Equipment designed for the "production" of "composite" structures or laminates or "fibrous or filamentary materials", as follows, and specially designed components and accessories therefor:
-
# a.
Filament winding machines, of which the motions for positioning, wrapping and winding fibres are coordinated and programmed in three or more 'primary servo positioning' axes, specially designed for the manufacture of "composite" structures or laminates, from "fibrous or filamentary materials";
-
# b.
'Tape-laying machines', of which the motions for positioning and laying tape are coordinated and programmed in five or more 'primary servo positioning' axes, specially designed for the manufacture of "composite" airframe or 'missile' structures;
-
# c.
Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, specially designed or modified for weaving, interlacing or braiding fibres, for "composite" structures;
-
# d.
Equipment specially designed or adapted for the modified for the "production" of "fibrous or filamentary materials" specified in 1C010, as follows:
-
# 1.
Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibres or silicon carbide fibres, including special equipment to strain the fibre during heating;
-
# 2.
Equipment for the chemical vapour deposition of elements or compounds, on heated filamentary substrates, to manufacture silicon carbide fibres;
-
# 3.
Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);
-
# 4.
Equipment for converting aluminium containing precursor fibres into alumina fibres by heat treatment;
-
-
# e.
Equipment specially designed or modified for the production of prepregs by the 'hot melt method':
-
# f.
Non-destructive inspection equipment specially designed for "composite" materials, as follows:
-
# 1.
X-ray tomography systems for three dimensional defect inspection;
-
# 2.
Numerically controlled ultrasonic testing machines of which the motions for positioning transmitters or receivers are simultaneously coordinated and programmed in four or more axes to follow the three dimensional contours of the component under inspection;
-
-
# g.
'Tow-placement machines', of which the motions for positioning and laying tows are coordinated and programmed in two or more 'primary servo positioning' axes, specially designed for the manufacture of "composite" airframe or 'missile' structures.
-
-
# 1B002.
Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
-
# 1B003.
Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
-
# 1B101.
Equipment, other than that specified in 1B001, for the "production" of structural composites as follows; and specially designed components and accessories therefor:
-
# a.
Filament winding machines or fibre placement machines, of which the motions for positioning, wrapping and winding fibres can be coordinated and programmed in three or more axes, designed to fabricate composite structures or laminates from fibrous or filamentary materials, and coordinating and programming controls;
-
# b.
Tape-laying machines of which the motions for positioning and laying tape and sheets can be coordinated and programmed in two or more axes, designed for the manufacture of composite airframe and "missile" structures;
-
# c.
Equipment designed or modified for the "production" of "fibrous or filamentary materials" as follows:
-
# 1.
Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon or polycarbosilane) including special provision to strain the fibre during heating;
-
# 2.
Equipment for the vapour deposition of elements or compounds on heated filament substrates;
-
# 3.
Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);
-
-
# d.
Equipment designed or modified for special fibre surface treatment or for producing prepregs and preforms specified in entry 9C110.
-
-
# 1B102.
Metal powder "production equipment", other than that specified in 1B002, and components as follows:
-
# a.
Metal powder "production equipment" usable for the "production", in a controlled environment, of spherical, spheroidal or atomised materials specified in 1C011.a., 1C011.b., 1C111.a.1., 1C111.a.2. or in the Military Goods Controls.
-
# b.
Specially designed components for "production equipment" specified in 1B002 or 1B102.a.
-
-
# 1B115.
Equipment, other than that specified in 1B002 or 1B102, for the production of propellant and propellant constituents, as follows, and specially designed components therefor:
-
# a.
"Production equipment" for the "production", handling or acceptance testing of liquid propellants or propellant constituents specified in 1C011.a., 1C011.b., 1C111 or in the Military Goods Controls;
-
# b.
"Production equipment" for the "production", handling, mixing, curing, casting, pressing, machining, extruding or acceptance testing of solid propellants or propellant constituents specified in 1C011.a., 1C011.b., 1C111 or in the Military Goods Controls.
-
-
# 1B116.
Specially designed nozzles for producing pyrolitically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the 1 573 K (1 300oC) to 3 173 K (2 900oC) temperature range at pressures of 130 Pa to 20 kPa.
-
# 1B117.
Batch mixers having all of the following, and specially designed components therefor:
-
# 1B118.
Continuous mixers having all of the following, and specially designed components therefor:
-
# 1B119.
Fluid energy mills usable for grinding or milling substances specified in1C011.a., 1C011.b., 1C111 or in the Military Goods Controls, and specially designed components therefor.
-
# 1B201.
Filament winding machines, other than those specified in 1B001 or 1B101, and related equipment, as follows:
-
# a.
Filament winding machines having all of the following characteristics:
-
# 1.
Having motions for positioning, wrapping, and winding fibres coordinated and programmed in two or more axes;
-
# 2.
Specially designed to fabricate composite structures or laminates from "fibrous or filamentary materials"; and
-
# 3.
Capable of winding cylindrical tubes with an internal diameter between 75 and 650 mm and lengths of 300 mm or greater;
-
-
# b.
Coordinating and programming controls for the filament winding machines specified in 1B201.a.;
-
# c.
Precision mandrels for the filament winding machines specified in 1B201.a.
-
-
# 1B225.
Electrolytic cells for fluorine production with an output capacity greater than 250 g of fluorine per hour.
-
# 1B226.
Electromagnetic isotope separators designed for, or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or greater.
-
# 1B228.
Hydrogen-cryogenic distillation columns having all of the following characteristics:
-
# a.
Designed for operation with internal temperatures in the range of 15 K (-258°C) to 35 K (-238°C);
-
# b.
Designed for operation at an internal pressure in the range of 0.1 MPa to 1 MPa;
-
# c.
Constructed of either:
-
# d.
With internal diameters of 30 cm or greater and 'effective lengths' of 4 m or greater.
-
-
# 1B230.
Pumps capable of circulating solutions of concentrated or dilute potassium amide catalyst in liquid ammonia (KNH2/NH3), having all of the following characteristics:
-
# 1B231.
Tritium facilities or plants, and equipment therefor, as follows:
-
# 1B232.
Turboexpanders or turboexpander-compressor sets having both of the following characteristics:
-
# 1B233.
Lithium isotope separation facilities or plants, and systems and equipment therefor, as follows:
-
# a.
Facilities or plants for the separation of lithium isotopes;
-
# b.
Equipment for the separation of lithium isotopes based on the lithium-mercury amalgam process, as follows:
-
# c.
Ion exchange systems specially designed for lithium isotope separation, and specially designed components therefor;
-
# d.
Chemical exchange systems (employing crown ethers, cryptands, or lariat ethers), specially designed for lithium isotope separation, and specially designed components therefor.
-
-
# 1B234.
High explosive containment vessels, chambers, containers and other similar containment devices designed for the testing of high explosives or explosive devices and having both of the following characteristics:
-
# 1B235.
Target assemblies and components for the production of tritium as follows:
-
-
# 1C.
Materials
-
# 1C001.
Materials specially designed for absorbing electromagnetic radiation, or
-
# a.
Materials for absorbing frequencies exceeding 2 x 108 Hz but less than 3 x 1012 Hz;
-
# b.
Materials not transparent to visible light and specially designed for absorbing near-infrared radiation having a wavelength exceeding 810 nm but less than 2 000 nm (frequencies exceeding 150 THz but less than 370 THz);
-
# c.
Intrinsically conductive polymeric materials with a 'bulk electrical conductivity' exceeding 10 000 S/m (Siemens per metre) or a 'sheet (surface) resistivity' of less than 100 ohms/square, based on any of the following polymers:
-
-
# 1C002.
Metal alloys, metal alloy powder and alloyed materials, as follows:
-
# 1C003.
Magnetic metals, of all types and of whatever form, having any of the following:
-
# 1C004.
Uranium titanium alloys or tungsten alloys with a "matrix" based on iron, nickel or copper, having all of the following:
-
# 1C005.
"Superconductive" "composite" conductors in lengths exceeding 100 m or with a mass exceeding 100 g, as follows:
-
# a.
"Superconductive" "composite" conductors containing one or more niobium-titanium 'filaments', having all of the following:
-
# b.
"Superconductive" "composite" conductors consisting of one or more "superconductive" 'filaments' other than niobium-titanium, having all of the following:
-
# 1.
A "critical temperature" at zero magnetic induction exceeding 9.85 K (-263.3°C); and
-
# 2.
Remaining in the "superconductive" state at a temperature of 4.2 K (-268.95°C) when exposed to a magnetic field oriented in any direction perpendicular to the longitudinal axis of conductor and corresponding to a magnetic induction of 12 T with critical current density exceeding 1 750 A/mm2 on overall cross-section of the conductor;
-
-
# c.
"Superconductive" "composite" conductors consisting of one or more "superconductive" 'filaments' which remain "superconductive" above 115 K (-158.15°C).
-
-
# 1C006.
Fluids and lubricating materials, as follows:
-
# a.
Not used;
-
# b.
Lubricating materials containing, as their principal ingredients, phenylene or alkylphenylene ethers or thio-ethers, or their mixtures, containing more than two ether or thio-ether functions or mixtures thereof;
-
# c.
Damping or flotation fluids having all of the following:
-
# d.
Fluorocarbon fluids designed for electronic cooling and having all of the following:
-
-
# 1C007.
Ceramic powders, ceramic-"matrix" "composite" materials and 'precursor materials', as follows:
-
# a.
Ceramic powders of titanium diboride (TiB2) (CAS 12045-63-5) having total metallic impurities, excluding intentional additions, of less than 5 000 ppm, an average particle size equal to or less than 5 µm and no more than 10% of the particles larger than 10 µm;
-
# b.
Not used;
-
# c.
Ceramic-"matrix" "composite" materials as follows:
-
# 1.
Ceramic-ceramic "composite" materials with a glass or oxide-"matrix" and reinforced with any of the following:
-
# 2.
Ceramic-"matrix" "composite" materials with a "matrix" formed of carbides or nitrides of silicon, zirconium or boron;
-
-
# d.
Not used;
-
# e.
'Precursor materials' specially designed for the "production" of materials specified in 1C007.c., as follows:
-
# f.
Not used.
-
-
# 1C008.
Non-fluorinated polymeric substances as follows:
-
# a.
Imides, as follows:
-
# 1.
Bismaleimides;
-
# 2.
Aromatic polyamide-imides (PAI) having a 'glass transition temperature (Tg) ' exceeding 563 K (290°C);
-
# 3.
Aromatic polyimides having a 'glass transition temperature (Tg)' exceeding 505 K (232°C);
-
# 4.
Aromatic polyetherimides having a 'glass transition temperature (Tg)' exceeding 563 K (290°C);
-
-
# b.
Not used;
-
# c.
Not used;
-
# d.
Polyarylene ketones;
-
# e.
Polyarylene sulphides, where the arylene group is biphenylene, triphenylene or combinations thereof;
-
# f.
Polybiphenylenethersulphone having a 'glass transition temperature (Tg)' exceeding 563 K (290°C).
-
-
# 1C009.
Unprocessed fluorinated compounds as follows:
-
# 1C010.
"Fibrous or filamentary materials", as follows:
-
# a.
Organic "fibrous or filamentary materials", having all of the following:
-
# b.
Carbon "fibrous or filamentary materials", having all of the following:
-
# c.
Inorganic "fibrous or filamentary materials", having all of the following:
-
# 1.
Having any of the following:
-
# a.
Composed of 50% or more by weight silicon dioxide and having a "specific modulus" exceeding 2.54 x 106 m; or
-
# b.
Not specified in 1C010.c.1.a. and having a "specific modulus" exceeding 5.6 x 106 m; and
-
-
# 2.
Melting, softening, decomposition or sublimation point exceeding 1 922 K (1 649°C) in an inert environment;
-
-
# d.
"Fibrous or filamentary materials", having any of the following:
-
# e.
Fully or partially resin-impregnated or pitch-impregnated "fibrous or filamentary materials" (prepregs), metal or carbon-coated "fibrous or filamentary materials" (preforms) or 'carbon fibre preforms', having all of the following:
-
# 1.
Having any of the following:
-
# 2.
Having any of the following:
-
# a.
-
# b.
'Dynamic Mechanical Analysis glass transition temperature (DMA Tg)' equal to or exceeding 453 K (180ºC) and having a phenolic resin; or
-
# c.
'Dynamic Mechanical Analysis glass transition temperature (DMA Tg)' equal to or exceeding 505 K (232ºC) and having a resin or pitch, not specified in 1C008 or 1C009.b., and not being a phenolic resin.
-
-
-
-
# 1C011.
Metals and compounds, as follows:
-
# a.
Metals in particle sizes of less than 60 µm whether spherical, atomised, spheroidal, flaked or ground, manufactured from material consisting of 99% or more of zirconium, magnesium and alloys thereof;
-
# b.
Boron or boron alloys, with a particle size of 60 µm or less, as follows:
-
# c.
Guanidine nitrate (CAS 506-93-4);
-
# d.
Nitroguanidine (NQ) (CAS 556-88-7);
-
# e.
Iodine pentafluoride (CAS 7783-66-6).
-
-
# 1C012.
Materials as follows:
-
# 1C101.
Materials and devices for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures, other than those specified in 1C001, usable in 'missiles', "missile" subsystems or unmanned aerial vehicles specified in 9A012 or 9A112.a.
-
# 1C102.
Resaturated pyrolized carbon-carbon materials designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
-
# 1C107.
Graphite and ceramic materials, other than those specified in 1C007, as follows:
-
# a.
Fine grain graphites with a bulk density of 1.72 g/cm3 or greater, measured at 288 K (15°C), and having a grain size of 100 µm or less, usable for rocket nozzles and re-entry vehicle nose tips, which can be machined to any of the following products:
-
# b.
Pyrolytic or fibrous reinforced graphites, usable for rocket nozzles and reentry vehicle nose tips usable in "missiles", space launch vehicles specified in 9A004 or sounding rockets specified in 9A104;
-
# c.
Ceramic composite materials (dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in radomes usable in "missiles", space launch vehicles specified in 9A004 or sounding rockets specified in 9A104;
-
# d.
Bulk machinable silicon-carbide reinforced unfired ceramic, usable for nose tips usable in "missiles", space launch vehicles specified in 9A004 or sounding rockets specified in 9A104;
-
# e.
Reinforced silicon-carbide ceramic composites, usable for nose tips, reentry vehicles and nozzle flaps usable in "missiles", space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
-
# f.
Bulk machinable ceramic composite materials consisting of an 'Ultra High Temperature Ceramic (UHTC)' matrix with a melting point equal to or greater than 3 000°C and reinforced with fibres or filaments, usable for missile components (such as nose-tips, re-entry vehicles, leading edges, jet vanes, control surfaces or rocket motor throat inserts) in "missiles", space launch vehicles specified in 9A004, sounding rockets specified in 9A104 or 'missiles'.
-
-
# 1C111.
Propellants and constituent chemicals for propellants, other than those specified in 1C011, as follows:
-
# a.
Propulsive substances:
-
# 1.
Spherical or spheroidal aluminium powder other than that specified in the Military Goods Controls, in particle size of less than 200 µm and an aluminium content of 97% by weight or more, if at least 10% of the total weight is made up of particles of less than 63 µm, according to ISO 2591-1:1988 or national equivalents;
-
# 2.
Metal powders, other than that specified in the Military Goods Controls, as follows:
-
# a.
Metal powders of zirconium, beryllium or magnesium, or alloys of these metals, if at least 90% of the total particles by particle volume or weight are made up of particles of less than 60 µm (determined by measurement techniques such as using a sieve, laser diffraction or optical scanning), whether spherical, atomized, spheroidal, flaked or ground, consisting 97% by weight or more of any of the following:
-
# b.
Metal powders of either boron or boron alloys with a boron content of 85% or more by weight, if at least 90% of the total particles by particle volume or weight are made up of particles of less than 60 µm (determined by measurement techniques such as using a sieve, laser diffraction or optical scanning), whether spherical, atomised, spheroidal, flaked or ground;
-
-
# 3.
Oxidiser substances usable in liquid propellant rocket engines as follows:
-
# a.
Dinitrogen trioxide (CAS 10544-73-7);
-
# b.
Nitrogen dioxide (CAS 10102-44-0)/dinitrogen tetroxide (CAS 10544-72-6);
-
# c.
Dinitrogen pentoxide (CAS 10102-03-1);
-
# d.
Mixed Oxides of Nitrogen (MON);
-
# e.
SEE MILITARY GOODS CONTROLS FOR Inhibited Red Fuming Nitric Acid (IRFNA);
-
# f.
SEE MILITARY GOODS CONTROLS AND 1C238 FOR compounds composed of fluorine and one or more of other halogens, oxygen or nitrogen.
-
-
# 4.
Hydrazine derivatives as follows:
-
# a.
Trimethylhydrazine (CAS 1741-01-1);
-
# b.
Tetramethylhydrazine (CAS 6415-12-9);
-
# c.
N,N-Diallylhydrazine (CAS 5164-11-4);
-
# d.
Allylhydrazine (CAS 7422-78-8);
-
# e.
Ethylene dihydrazine (CAS 6068-98-0);
-
# f.
Monomethylhydrazine dinitrate;
-
# g.
Unsymmetrical dimethylhydrazine nitrate;
-
# h.
Hydrazinium azide (CAS 14546-44-2);
-
# i.
1,1-Dimethylhydrazinium azide (CAS 227955-52-4) / 1,2-Dimethylhydrazinium azide (CAS 299177-50-7);
-
# j.
Hydrazinium dinitrate (CAS 13464-98-7);
-
# k.
Diimido oxalic acid dihydrazine (CAS 3457-37-2);
-
# l.
2-hydroxyethylhydrazine nitrate (HEHN);
-
# m.
See Military Goods Controls for Hydrazinium perchlorate;
-
# n.
Hydrazinium diperchlorate (CAS 13812-39-0);
-
# o.
Methylhydrazine nitrate (MHN) (CAS 29674-96-2);
-
# p.
1,1-Diethylhydrazine nitrate (DEHN) / 1,2-Diethylhydrazine nitrate (DEHN) (CAS 363453-17-2);
-
# q.
3,6-Dihydrazino tetrazine nitrate (1,4-dihydrazine nitrate) (DHTN);
-
-
# 5.
High energy density materials, other than that specified in the Military Goods Controls, usable in 'missiles' or unmanned aerial vehicles specified in 9A012 or 9A112.a.;
-
# a.
Mixed fuel that incorporate both solid and liquid fuels, such as boron slurry, having a mass-based energy density of 40 x 106 J/kg or greater;
-
# b.
Other high energy density fuels and fuel additives (e.g., cubane, ionic solutions, JP-10) having a volume-based energy density of 37.5 x 109 J/m3 or greater, measured at 20 oC and one atmosphere (101.325 kPa) pressure;
-
-
# 6.
Hydrazine replacement fuels as follows:
-
# a.
2-Dimethylaminoethylazide (DMAZ) (CAS 86147-04-8);
-
-
-
# b.
Polymeric substances:
-
# 1.
Carboxy-terminated polybutadiene (including carboxyl-terminated polybutadiene) (CTPB);
-
# 2.
Hydroxy-terminated polybutadiene (including hydroxyl-terminated polybutadiene) (HTPB) (CAS 69102-90-5), other than that specified in the Military Goods Controls;
-
# 3.
Polybutadiene-acrylic acid (PBAA);
-
# 4.
Polybutadiene-acrylic acid-acrylonitrile (PBAN) (CAS 25265-19-4 / CAS 68891-50-9);
-
# 5.
Polytetrahydrofuran polyethylene glycol (TPEG);
-
# 6.
SEE MILITARY GOODS CONTROLS FOR polyglycidyl nitrate (PGN or poly-GLYN) (CAS 27814-48-8).
-
-
# c.
Other propellant additives and agents:
-
# 1.
SEE MILITARY GOODS CONTROLS FOR carboranes, decaboranes, pentaboranes and derivatives thereof;
-
# 2.
Triethylene glycol dinitrate (TEGDN) (CAS 111-22-8);
-
# 3.
2-Nitrodiphenylamine (CAS 119-75-5);
-
# 4.
SEE MILITARY GOODS CONTROLS FOR trimethylolethane trinitrate (TMETN) (CAS 3032-55-1);
-
# 5.
Diethylene glycol dinitrate (DEGDN) (CAS 693-21-0);
-
# 6.
Ferrocene derivatives as follows:
-
# a.
SEE MILITARY GOODS CONTROLS FOR catocene (CAS 37206-42-1);
-
# b.
SEE MILITARY GOODS CONTROLS FOR Ethyl ferrocene (CAS 1273-89-8);
-
# c.
SEE MILITARY GOODS CONTROLS FOR n-Propyl ferrocene (CAS 1273-92-3)/iso-propyl ferrocene (CAS 12126-81-7);
-
# d.
SEE MILITARY GOODS CONTROLS FOR n-butyl ferrocene (CAS 31904-29-7);
-
# e.
SEE MILITARY GOODS CONTROLS FOR Pentyl ferrocene (CAS 1274-00-6);
-
# f.
SEE MILITARY GOODS CONTROLS FOR Dicyclopentyl ferrocene (CAS 125861-17-8);
-
# g.
SEE MILITARY GOODS CONTROLS FOR Dicyclohexyl ferrocene;
-
# h.
SEE MILITARY GOODS CONTROLS FOR Diethyl ferrocene (CAS 1273-97-8);
-
# i.
SEE MILITARY GOODS CONTROLS FOR Dipropyl ferrocene;
-
# j.
SEE MILITARY GOODS CONTROLS FOR Dibutyl ferrocene (CAS 1274-08-4);
-
# k.
SEE MILITARY GOODS CONTROLS FOR Dihexyl ferrocene (CAS 93894-59-8);
-
# l.
SEE MILITARY GOODS CONTROLS FOR Acetyl ferrocene (CAS 1271-55-2) / 1,1'-diacetyl ferrocene (CAS 1273-94-5);
-
# m.
SEE MILITARY GOODS CONTROLS FOR Ferrocene carboxylic acid (CAS 1271-42-7) / 1,1'-Ferrocenedicarboxylic acid (CAS 1293-87-4);
-
# n.
SEE MILITARY GOODS CONTROLS FOR butacene (CAS 125856-62-4);
-
# o.
Other ferrocene derivatives usable as rocket propellant burning rate modifiers, other than those specified in the Military Goods Controls.
-
-
# 7.
4,5-Diazidomethyl-2-methyl-1,2,3-triazole (iso- DAMTR) , other than that specified in the Military Goods Controls.
-
-
# d.
'Gel propellants', other than that specified in the Military Goods Controls, specifically formulated for use in 'missiles'.
-
-
# 1C116.
Maraging steels, useable in 'missiles', having all of the following:
-
# 1.
Generally characterised by high nickel content, carbon content of less than or equal to 0.03% by weight, and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy; and
-
# 2.
Subjected to heat treatment cycles to facilitate the martensitic transformation process (solution annealed stage) and subsequently age hardened (precipitation hardened stage). Technical Note 2: In 1C116 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
-
# a.
Having an ultimate tensile strength, measured at 293 K (20°C), equal to or greater than:
-
# b.
Any of the following forms:
-
-
# 1C117.
Materials for the fabrication of 'missiles' components as follows:
-
# a.
Tungsten and alloys in particulate form with a tungsten content of 97% by weight or more and a particle size of 50 x 10-6 m (50 µm) or less;
-
# b.
Molybdenum and alloys in particulate form with a molybdenum content of 97% by weight or more and a particle size of 50 x 10-6 m (50 µm) or less;
-
# c.
Tungsten materials in solid form having all of the following:
-
-
# 1C118.
Titanium-stabilised duplex stainless steel (Ti-DSS) having all of the following:
-
# a.
Having all of the following characteristics:
-
# 1.
Containing 17.0 - 23.0% by weight of chromium and 4.5 - 7.0% by weight of nickel;
-
# 2.
Having a titanium content of greater than 0.10% by weight; and
-
# 3.
A ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10% by volume (according to ASTM E-1181-87 or national equivalents) is austenite; and
-
-
# b.
Having any of the following forms:
-
-
# 1C202.
Alloys, other than those specified in 1C002.b.3. or .b.4., as follows:
-
# 1C210.
'Fibrous or filamentary materials' or prepregs, other than those specified in 1C010.a., b. or e., as follows:
-
# a.
Carbon or aramid 'fibrous or filamentary materials' having either of the following characteristics:
-
# b.
Glass 'fibrous or filamentary materials' having both of the following characteristics:
-
# c.
Thermoset resin impregnated continuous "yarns", "rovings", "tows" or "tapes" with a width of 15 mm or less (prepregs), made from carbon or glass 'fibrous or filamentary materials' specified in 1C210.a. or b.
-
-
# 1C216.
Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1 950 MPa or more, at 293 K (20oC).
-
# 1C225.
Boron enriched in the boron-10 (10B) isotope to greater than its natural isotopic abundance, as follows: elemental boron, compounds, mixtures containing boron, manufactures thereof, waste or scrap of any of the foregoing.
-
# 1C226.
Tungsten, tungsten carbide, and alloys containing more than 90% tungsten by weight, other than that specified in 1C117, having both of the following characteristics:
-
# 1C227.
Calcium having both of the following characteristics:
-
# 1C228.
Magnesium having both of the following characteristics:
-
# 1C229.
Bismuth having both of the following characteristics:
-
# 1C230.
Beryllium metal, alloys containing more than 50% beryllium by weight, beryllium compounds, manufactures thereof, and waste or scrap of any of the foregoing, other than that specified in the Military Goods Controls.
-
# 1C231.
Hafnium metal, alloys containing more than 60% hafnium by weight, hafnium compounds containing more than 60% hafnium by weight, manufactures thereof, and waste or scrap of any of the foregoing.
-
# 1C232.
Helium-3 (3He), mixtures containing helium-3, and products or devices containing any of the foregoing.
-
# 1C233.
Lithium enriched in the lithium-6 (6Li) isotope to greater than its natural isotopic abundance, and products or devices containing enriched lithium, as follows: elemental lithium, alloys, compounds, mixtures containing lithium, manufactures thereof, waste or scrap of any of the foregoing.
-
# 1C234.
Zirconium with a hafnium content of less than 1 part hafnium to 500 parts zirconium by weight, as follows: metal, alloys containing more than 50% zirconium by weight, compounds, manufactures thereof, waste or scrap of any of the foregoing, other than those specified in 0A001.f.
-
# 1C235.
Tritium, tritium compounds, mixtures containing tritium in which the ratio of tritium to hydrogen atoms exceeds 1 part in 1 000, and products or devices containing any of the foregoing.
-
# 1C236.
'Radionuclides' appropriate for making neutron sources based on alpha-n reaction, other than those specified in 0C001 and 1C012.a., in the following forms:
-
# 1C237.
Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium-226, manufactures thereof, and products or devices containing any of the foregoing.
-
# 1C238.
Chlorine trifluoride (ClF3).
-
# 1C239.
High explosives, other than those specified in the Military Goods Controls, or substances or mixtures containing more than 2% by weight thereof, with a crystal density greater than 1.8 g/cm3 and having a detonation velocity greater than 8 000 m/s.
-
# 1C240.
Nickel powder and porous nickel metal, other than those specified in 0C005, as follows:
-
# 1C241.
Rhenium, and alloys containing 90% by weight or more rhenium; and alloys of rhenium and tungsten containing 90% by weight or more of any combination of rhenium and tungsten, other than those specified in 1C226, having both of the following characteristics:
-
# 1C350.
Chemicals, which may be used as precursors for toxic chemical agents, as follows, and "chemical mixtures" containing one or more thereof:
-
# 1.
Thiodiglycol (CAS 111-48-8);
-
# 2.
Phosphorus oxychloride (CAS 10025-87-3);
-
# 3.
Dimethyl methylphosphonate (CAS 756-79-6);
-
# 4.
SEE MILITARY GOODS CONTROLS FOR Methyl phosphonyl difluoride (CAS 676-99-3);
-
# 5.
Methyl phosphonyl dichloride (CAS 676-97-1);
-
# 6.
Dimethyl phosphite (DMP) (CAS 868-85-9);
-
# 7.
Phosphorus trichloride (CAS 7719-12-2);
-
# 8.
Trimethyl phosphite (TMP) (CAS 121-45-9);
-
# 9.
Thionyl chloride (CAS 7719-09-7);
-
# 10.
3-Hydroxy-1-methylpiperidine (CAS 3554-74-3);
-
# 11.
N,N-Diisopropyl-(beta)-aminoethyl chloride (96-79-7);
-
# 12.
N,N-Diisopropyl-(beta)-aminoethane thiol (CAS 5842-07-9);
-
# 13.
3-Quinuclidinol (CAS 1619-34-7);
-
# 14.
Potassium fluoride (CAS 7789-23-3);
-
# 15.
2-Chloroethanol (CAS 107-07-3);
-
# 16.
Dimethylamine (CAS 124-40-3);
-
# 17.
Diethyl ethylphosphonate (CAS 78-38-6);
-
# 18.
Diethyl-N,N-dimethylphosphoramidate (CAS 2404-03-7);
-
# 19.
Diethyl phosphite (CAS 762-04-9);
-
# 20.
Dimethylamine hydrochloride (CAS 506-59-2);
-
# 21.
Ethyl phosphinyl dichloride (CAS 1498-40-4);
-
# 22.
Ethyl phosphonyl dichloride (CAS 1066-50-8);
-
# 23.
SEE MILITARY GOODS CONTROLS FOR Ethyl phosphonyl difluoride (CAS 753-98-0);
-
# 24.
Hydrogen fluoride (CAS 7664-39-3);
-
# 25.
Methyl benzilate (CAS 76-89-1);
-
# 26.
Methyl phosphinyl dichloride (CAS 676-83-5);
-
# 27.
N,N-Diisopropyl-(beta)-amino ethanol (CAS 96-80-0);
-
# 28.
Pinacolyl alcohol (CAS 464-07-3);
-
# 29.
SEE MILITARY GOODS CONTROLS FOR O-Ethyl O-2-diisopropylaminoethyl methylphosphonite (QL) (CAS 57856-11-8);
-
# 30.
Triethyl phosphite (CAS 122-52-1);
-
# 31.
Arsenic trichloride (CAS 7784-34-1);
-
# 32.
Benzilic acid (CAS 76-93-7);
-
# 33.
Diethyl methylphosphonite (CAS 15715-41-0);
-
# 34.
Dimethyl ethylphosphonate (CAS 6163-75-3);
-
# 35.
Ethyl phosphinyl difluoride (CAS 430-78-4);
-
# 36.
Methyl phosphinyl difluoride (CAS 753-59-3);
-
# 37.
3-Quinuclidone (CAS 3731-38-2);
-
# 38.
Phosphorus pentachloride (CAS 10026-13-8);
-
# 39.
Pinacolone (CAS 75-97-8);
-
# 40.
Potassium cyanide (CAS 151-50-8);
-
# 41.
Potassium bifluoride (CAS 7789-29-9);
-
# 42.
Ammonium hydrogen fluoride or ammonium bifluoride (CAS 1341-49-7);
-
# 43.
Sodium fluoride (CAS 7681-49-4);
-
# 44.
Sodium bifluoride (CAS 1333-83-1);
-
# 45.
Sodium cyanide (CAS 143-33-9);
-
# 46.
Triethanolamine (CAS 102-71-6);
-
# 47.
Phosphorus pentasulphide (CAS 1314-80-3);
-
# 48.
Di-isopropylamine (CAS 108-18-9);
-
# 49.
Diethylaminoethanol (CAS 100-37-8);
-
# 50.
Sodium sulphide (CAS 1313-82-2);
-
# 51.
Sulphur monochloride (CAS 10025-67-9);
-
# 52.
Sulphur dichloride (CAS 10545-99-0);
-
# 53.
Triethanolamine hydrochloride (CAS 637-39-8);
-
# 54.
N,N-Diisopropyl-(Beta)-aminoethyl chloride hydrochloride (CAS 4261-68-1);
-
# 55.
Methylphosphonic acid (CAS 993-13-5);
-
# 56.
Diethyl methylphosphonate (CAS 683-08-9);
-
# 57.
N,N-Dimethylaminophosphoryl dichloride (CAS 677-43-0);
-
# 58.
Triisopropyl phosphite (CAS 116-17-6);
-
# 59.
Ethyldiethanolamine (CAS 139-87-7);
-
# 60.
O,O-Diethyl phosphorothioate (CAS 2465-65-8);
-
# 61.
O,O-Diethyl phosphorodithioate (CAS 298-06-6);
-
# 62.
Sodium hexafluorosilicate (CAS 16893-85-9);
-
# 63.
Methylphosphonothioic dichloride (CAS 676-98-2);
-
# 64.
Diethylamine (CAS 109-89-7);
-
# 65.
N,N-Diisopropylaminoethanethiol hydrochloride (CAS 41480-75-5);
-
# 66.
Methyl dichlorophosphate (CAS 677-24-7);
-
# 67.
Ethyl dichlorophosphate (CAS 1498-51-7);
-
# 68.
Methyl difluorophosphate (CAS 22382-13-4);
-
# 69.
Ethyl difluorophosphate (CAS 460-52-6);
-
# 70.
Diethyl chlorophosphite (CAS 589-57-1);
-
# 71.
Methyl chlorofluorophosphate (CAS 754-01-8);
-
# 72.
Ethyl chlorofluorophosphate (CAS 762-77-6);
-
# 73.
N,N-Dimethylformamidine (CAS 44205-42-7);
-
# 74.
N,N-Diethylformamidine (CAS 90324-67-7);
-
# 75.
N,N-Dipropylformamidine (CAS 48044-20-8);
-
# 76.
N,N-Diisopropylformamidine (CAS 857522-08-8);
-
# 77.
N,N-Dimethylacetamidine (CAS 2909-14-0);
-
# 78.
N,N-Diethylacetamidine (CAS 14277-06-6);
-
# 79.
N,N-Dipropylacetamidine (CAS 1339586-99-0);
-
# 80.
N,N-Dimethylpropanamidine (CAS 56776-14-8);
-
# 81.
N,N-Diethylpropanamidine (CAS 84764-73-8);
-
# 82.
N,N-Dipropylpropanamidine (CAS 1341496-89-6);
-
# 83.
N,N-Dimethylbutanamidine (CAS 1340437-35-5);
-
# 84.
N,N-Diethylbutanamidine (CAS 53510-30-8);
-
# 85.
N,N-Dipropylbutanamidine (CAS 1342422-35-8);
-
# 86.
N,N-Diisopropylbutanamidine (CAS 1315467-17-4);
-
# 87.
N,N-Dimethylisobutanamidine (CAS 321881-25-8);
-
# 88.
N,N-Diethylisobutanamidine (CAS 1342789-47-2);
-
# 89.
N,N-Dipropylisobutanamidine (CAS 1342700-45-1);
-
# 90.
Dipropylamine (CAS 142-84-7).
-
-
# 1C351.
Human and animal pathogens and "toxins", as follows:
-
# a.
Viruses, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material including living material which has been deliberately inoculated or contaminated with such cultures, as follows:
-
# 1.
African horse sickness virus;
-
# 2.
African swine fever virus;
-
# 3.
Andes virus;
-
# 4.
Avian influenza virus, which are:
-
# a.
Uncharacterised; or
-
# b.
Defined in Annex I(2) EC Directive 2005/94/EC (O.J. L.10 14.1.2006 p.16) as having high pathogenicity, as follows:
-
# 1.
Type A viruses with an IVPI (intravenous pathogenicity index) in 6 week old chickens of greater than 1.2; or
-
# 2.
Type A viruses of the subtypes H5 or H7 with genome sequences codified for multiple basic amino acids at the cleavage site of the haemagglutinin molecule similar to that observed for other HPAI viruses, indicating that the haemagglutinin molecule can be cleaved by a host ubiquitous protease;
-
-
-
# 5.
Bluetongue virus;
-
# 6.
Chapare virus;
-
# 7.
Chikungunya virus;
-
# 8.
Choclo virus;
-
# 9.
Crimean-Congo hemorrhagic fever virus;
-
# 10.
Not used;
-
# 11.
Dobrava-Belgrade virus;
-
# 12.
Eastern equine encephalitis virus;
-
# 13.
Ebolavirus: all members of the Ebolavirus genus;
-
# 14.
Foot-and-mouth disease virus;
-
# 15.
Goatpox virus;
-
# 16.
Guanarito virus;
-
# 17.
Hantaan virus;
-
# 18.
Hendra virus (Equine morbillivirus);
-
# 19.
Suid herpesvirus 1 (Pseudorabies virus; Aujeszky's disease);
-
# 20.
Classical swine fever virus (Hog cholera virus);
-
# 21.
Japanese encephalitis virus;
-
# 22.
Junin virus;
-
# 23.
Kyasanur Forest disease virus;
-
# 24.
Laguna Negra virus;
-
# 25.
Lassa virus;
-
# 26.
Louping ill virus;
-
# 27.
Lujo virus;
-
# 28.
Lumpy skin disease virus;
-
# 29.
Lymphocytic choriomeningitis virus;
-
# 30.
Machupo virus;
-
# 31.
Marburgvirus: all members of the Marburgvirus genus;
-
# 32.
Monkeypox virus;
-
# 33.
Murray Valley encephalitis virus;
-
# 34.
Newcastle disease virus;
-
# 35.
Nipah virus;
-
# 36.
Omsk hemorrhagic fever virus;
-
# 37.
Oropouche virus;
-
# 38.
Peste-des-petits-ruminants virus;
-
# 39.
Swine vesicular disease virus;
-
# 40.
Powassan virus;
-
# 41.
Rabies virus and all other members of the Lyssavirus genus;
-
# 42.
Rift Valley fever virus;
-
# 43.
Rinderpest virus;
-
# 44.
Rocio virus;
-
# 45.
Sabia virus;
-
# 46.
Seoul virus;
-
# 47.
Sheeppox virus;
-
# 48.
Sin Nombre virus;
-
# 49.
St. Louis encephalitis virus;
-
# 50.
Porcine Teschovirus;
-
# 51.
Tick-borne encephalitis virus (Far Eastern subtype);
-
# 52.
Variola virus;
-
# 53.
Venezuelan equine encephalitis virus;
-
# 54.
Vesicular stomatitis virus;
-
# 55.
Western equine encephalitis virus;
-
# 56.
Yellow fever virus;
-
# 57.
Severe acute respiratory syndrome-related coronavirus (SARS-related coronavirus);
-
# 58.
Reconstructed 1918 influenza virus;
-
# 59.
Middle East respiratory syndrome-related coronavirus (MERS-related coronavirus);
-
-
# b.
Not used;
-
# c.
Bacteria, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material including living material which has been deliberately inoculated or contaminated with such cultures, as follows:
-
# 1.
Bacillus anthracis;
-
# 2.
Brucella abortus;
-
# 3.
Brucella melitensis;
-
# 4.
Brucella suis;
-
# 5.
Burkholderia mallei (Pseudomonas mallei);
-
# 6.
Burkholderia pseudomallei (Pseudomonas pseudomallei);
-
# 7.
Chlamydia psittaci (Chlamydophila psittaci );
-
# 8.
Clostridium argentinense (formerly known as Clostridium botulinum Type G), botulinum neurotoxin producing strains;
-
# 9.
Clostridium baratii, botulinum neurotoxin producing strains;
-
# 10.
Clostridium botulinum;
-
# 11.
Clostridium butyricum, botulinum neurotoxin producing strains;
-
# 12.
Clostridium perfringens epsilon toxin producing types;
-
# 13.
Coxiella burnetii;
-
# 14.
Francisella tularensis;
-
# 15.
Mycoplasma capricolum subspecies capripneumoniae (strain F38);
-
# 16.
Mycoplasma mycoides subspecies mycoides SC (small colony);
-
# 17.
Rickettsia prowazekii;
-
# 18.
Salmonella enterica subspecies enterica serovar Typhi (Salmonella typhi);
-
# 19.
Shiga toxin producing Escherichia coli (STEC) of serogroups O26, O45, O103, O104, O111, O121, O145, O157, and other shiga toxin producing serogroups;
-
# 20.
Shigella dysenteriae;
-
# 21.
Vibrio cholerae;
-
# 22.
Yersinia pestis;
-
-
# d.
"Toxins", as follows, and "sub-unit of toxins" thereof:
-
# 1.
Botulinum neurotoxins;
-
# 2.
Clostridium perfringens alpha, beta 1, beta 2, epsilon and iota toxins;
-
# 3.
Conotoxins;
-
# 4.
Ricin;
-
# 5.
Saxitoxin;
-
# 6.
Shiga toxins (shiga-like toxins, verotoxins and verocytotoxins);
-
# 7.
Staphylococcus aureus enterotoxins, hemolysin alpha toxin, and toxic shock syndrome toxin (formerly known as Staphylococcus enterotoxin F);
-
# 8.
Tetrodotoxin;
-
# 9.
Not used;
-
# 10.
Microcystins (Cyanginosins);
-
# 11.
Aflatoxins;
-
# 12.
Abrin;
-
# 13.
Not used;
-
# 14.
Diacetoxyscirpenol;
-
# 15.
T-2 toxin;
-
# 16.
HT-2 toxin;
-
# 17.
Modeccin;
-
# 18.
Volkensin;
-
# 19.
Viscumin (Viscum Album Lectin 1 );
-
# 20.
Brevetoxins;
-
# 21.
Gonyautoxins;
-
# 22.
Nodularins;
-
# 23.
Palytoxins;
-
# 24.
Neosaxitoxin (NEO);
-
-
# e.
Fungi, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material including living material which has been deliberately inoculated or contaminated with such cultures, as follows:
-
-
# 1C353.
'Genetic elements' and 'genetically-modified organisms', as follows:
-
# a.
Any 'genetically-modified organism' which contains, or 'genetic element' that codes for, any of the following:
-
# 1.
Any gene, genes, translated product or translated products, specific to any virus specified in 1C351.a. or 1C354.a.;
-
# 2.
Any gene or genes specific to any bacterium specified in 1C351.c. or 1C354.b. or fungus specified in 1C351.e. or 1C354.c., and which is any of the following:
-
# 3.
Any "toxins" specified in 1C351.d. or "sub-units of toxins" therefor;
-
-
# b.
Not used.
-
-
# 1C354.
Plant pathogens, as follows:
-
# a.
Viruses, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material including living material which has been deliberately inoculated or contaminated with such cultures, as follows:
-
# b.
Bacteria, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material which has been deliberately inoculated or contaminated with such cultures, as follows:
-
# 1.
Xanthomonas albilineans;
-
# 2.
Xanthomonas citri pv. citri (Xanthomonas axonopodis pv. citri, Xanthomonas campestris pv. citri);
-
# 3.
Xanthomonas oryzae pv. oryzae (Pseudomonas campestris pv. oryzae);
-
# 4.
Clavibacter michiganensis subsp. sepedonicus (Clavibacter sepedonicus, Clavibacter michiganense subsp. sepedonicus, Corynebacterium michiganensis subsp. sepedonicum or Corynebacterium sepedonicum);
-
# 5.
Ralstonia solanacearum, race 3, biovar 2;
-
-
# c.
Fungi, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material which has been deliberately inoculated or contaminated with such cultures, as follows:
-
# 1.
Colletotrichum kahawae (Colletotrichum coffeanum var. virulans);
-
# 2.
Bipolaris oryzae (Cochliobolus miyabeanus, Helminthosporium oryzae);
-
# 3.
Pseudocercospora ulei (Microcyclus ulei, Dothidella ulei);
-
# 4.
Puccinia graminis ssp. graminis var. graminis / Puccinia graminis ssp. graminis var. stakmanii (Puccinia graminis [syn. Puccinia graminis f. sp. tritici]);
-
# 5.
Puccinia striiformis (syn. Puccinia glumarum);
-
# 6.
Magnaporthe oryzae (Pyricularia oryzae);
-
# 7.
Peronosclerospora philippinensis (Peronosclerospora sacchari);
-
# 8.
Sclerophthora rayssiae var. zeae;
-
# 9.
Synchytrium endobioticium;
-
# 10.
Tilletia indica;
-
# 11.
Thecaphora solani.
-
-
-
# 1C450.
Toxic chemicals and toxic chemical precursors, as follows, and "chemical mixtures" containing one or more thereof:
-
# a.
Toxic chemicals, as follows:
-
# 1.
Amiton: O,O-Diethyl S-[2-(diethylamino)ethyl] phosphorothiolate (CAS 78-53-5) and corresponding alkylated or protonated salts;
-
# 2.
PFIB: 1,1,3,3,3-Pentafluoro-2-(trifluoromethyl)-1-propene (CAS 382-21-8);
-
# 3.
SEE MILITARY GOODS CONTROLS FOR BZ: 3-Quinuclidinyl benzilate (CAS 6581-06-2);
-
# 4.
Phosgene: Carbonyl dichloride (CAS 75-44-5);
-
# 5.
Cyanogen chloride (CAS 506-77-4);
-
# 6.
Hydrogen cyanide (CAS 74-90-8);
-
# 7.
Chloropicrin: Trichloronitromethane (CAS 76-06-2);
-
-
# b.
Toxic chemical precursors, as follows:
-
# 1.
Chemicals, other than those specified in the Military Goods Controls or in 1C350, containing a phosphorus atom to which is bonded one methyl, ethyl or propyl (normal or iso) group but not further carbon atoms;
-
# 2.
N,N-Dialkyl [methyl, ethyl or propyl (normal or iso)] phosphoramidic dihalides, other than N,N-Dimethylaminophosphoryl dichloride;
-
# 3.
Dialkyl [methyl, ethyl or propyl (normal or iso)] N,N-dialkyl [methyl, ethyl or propyl (normal or iso)]-phosphoramidates, other than Diethyl-N,N-dimethylphosphoramidate which is specified in 1C350;
-
# 4.
N,N-Dialkyl [methyl, ethyl or propyl (normal or iso)] aminoethyl-2-chlorides and corresponding protonated salts, other than N,N-Diisopropyl-(beta)-aminoethyl chloride or N,N-Diisopropyl-(beta)-aminoethyl chloride hydrochloride which are specified in 1C350;
-
# 5.
N,N-Dialkyl [methyl, ethyl or propyl (normal or iso)] aminoethane-2-ols and corresponding protonated salts, other than N,N-Diisopropyl-(beta)-aminoethanol (CAS 96-80-0) and N,N-Diethylaminoethanol (CAS 100-37-8) which are specified in 1C350;
-
# 6.
N,N-Dialkyl [methyl, ethyl or propyl (normal or iso)] aminoethane-2-thiols and corresponding protonated salts, other than N,N-Diisopropyl-(beta)-aminoethane thiol (CAS 5842-07-9) and N,N-Diisopropylaminoethanethiol hydrochloride (CAS 41480-75-5) which are specified in 1C350;
-
# 7.
See 1C350 for ethyldiethanolamine (CAS 139-87-7);
-
# 8.
Methyldiethanolamine (CAS 105-59-9).
-
-
-
# 1C513.
'High-entropy alloy' or 'refractory metal and alloy' powders, not specified in 1C002, having a surface modified with 'inoculants'.
-
-
# 1D.
Software
-
# 1D001.
"Software" specially designed or modified for the "development", "production" or "use" of equipment specified in 1B001 to 1B003.
-
# 1D002.
"Software" for the "development" of organic "matrix", metal "matrix" or carbon "matrix" laminates or "composites".
-
# 1D003.
"Software" specially designed or modified to enable equipment to perform the functions of equipment specified in 1A004.c. or 1A004.d.
-
# 1D101.
"Software" specially designed or modified for the operation or maintenance of goods specified in 1B101, 1B102, 1B115, 1B117, 1B118 or 1B119.
-
# 1D103.
"Software" specially designed for analysis of reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures.
-
# 1D201.
"Software" specially designed for the "use" of goods specified in 1B201.
-
-
# 1E.
Technology
-
# 1E001.
"Technology" according to the General Technology Note for the "development" or "production" of equipment or materials specified in 1A002 to 1A005, 1A006.b., 1A007, 1B or 1C.
-
# 1E002.
Other "technology" as follows:
-
# a.
"Technology" for the "development" or "production" of polybenzothiazoles or polybenzoxazoles;
-
# b.
"Technology" for the "development" or "production" of fluoroelastomer compounds containing at least one vinylether monomer;
-
# c.
"Technology" for the design or "production" of the following ceramic powders or non-"composite" ceramic materials:
-
# d.
Not used;
-
# e.
"Technology" for the installation, maintenance or repair of materials specified in 1C001;
-
# f.
"Technology" for the repair of "composite" structures, laminates or materials specified in 1A002 or 1C007.c.;
-
# g.
"Libraries" specially designed or modified to enable equipment to perform the functions of equipment specified in 1A004.c. or 1A004.d.
-
-
# 1E101.
"Technology" according to the General Technology Note for the "use" of goods specified in 1A102, 1B001, 1B101, 1B102, 1B115 to 1B119, 1C001, 1C101, 1C107, 1C111 to 1C118, 1D101 or 1D103.
-
# 1E102.
"Technology" according to the General Technology Note for the "development" of "software" specified in 1D001, 1D101 or 1D103.
-
# 1E103.
"Technology" for the regulation of temperature, pressure or atmosphere in autoclaves or hydroclaves, when used for the "production" of "composites" or partially processed "composites".
-
# 1E104.
"Technology" for the "production" of pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the 1 573 K (1 300°C) to 3 173 K (2 900°C) temperature range at pressures of 130 Pa to 20 kPa.
-
# 1E201.
"Technology" according to the General Technology Note for the "use" of goods specified in 1A002, 1A007, 1A202, 1A225 to 1A227, 1B201, 1B225 to 1B235, 1C002.b.3. or .b.4., 1C010.b., 1C202, 1C210, 1C216, 1C225 to 1C241 or 1D201.
-
# 1E202.
"Technology" according to the General Technology Note for the "development" or "production" of goods specified in 1A007, 1A202 or 1A225 to 1A227.
-
# 1E203.
"Technology" according to the General Technology Note for the "development" of "software" specified in 1D201.
-